Jba 40-2627 Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

**Installation recommendation:

JBA recommends in most cases that the vehicle be taken to a reputable exhaust shop.

40-2627 stainless steel

50-2627 aluminized

05-06 Mustang GT 4.6L 3v

Parts List:

A. P/S Muffler/Tip Assembly 1

B. D/S Muffler/Tip Assembly 1

C. 2-1/2" Clamp 2

RECOMMENDED TOOLS:

pry bar

ratchet

15mm deep socket

9/16 deep socket

channel lock pliers

anti-seize

spray lubricant or penetrating oil

Start:

1. Remove and inventory the

JBA Exhaust System.

2. Disconnect the negative

battery cable and allow the

exhaust system to completely

cool.

3. Loosen the clamps attaching

the exhaust to the H-pipe. Slide

the clamps back to separate the

two.

8. Slip the new JBA muffler/tip

assemblies (A) and (B) on to the

factory intermediate pipes. Make

sure to align the key way on the

intermediate pipe with the new

JBA muffler assembly.

7. Slide the JBA muffler/tip

assembly (A) and (B) hangers in

to the factory rubber isolators.

11. Check for proper alignment

and adequate clearance around

the new JBA tips. Tight all clamps

4. Loosen the clamps attaching

the muffler assemblies to the

intermediate pipes.

12. Using a soft cloth, wipe the

new JBA tips clean.

13. Reconnect the battery and

start the vehicle to check for

leaks.

5. Wiggle the intermediate pipes

out of the muffler pipes.

9. Install the supplied 2.5"

clamps (C) over the muffler and

intermediate pipe slip connection

JBA also offers long tube headers, shorty headers,

and h-pipes for the 05-06 Mustang. For more

information about these and other quality

performance products from JBA visit

www.jbaheaders.com

6. Slide the mufflers forward, out

of the hangers. Remove from car.

10. Fit the h-pipe and

intermediate pipes together and

and tighten the factory clamp.

JBA Long Tube Headers

Part No. 6675S

JBA Off-road H-pipe

Part No. 6675SH

2005 Mustang GT JBA Project Vehicle

See more pictures of this car at www.jbaheaders.com

7.3.06

Inhaltsverzeichnis

Seite 1 - 50-2627 aluminized

INSTALLATION INSTRUCTIONS **Installation recommendation: JBA recommends in most cases that the vehicle be taken to a reputable exhaust shop. 40-2627 s

Kommentare zu diesen Handbüchern

Keine Kommentare

Jba 40-2627 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Jba 40-2627 herunter. JBA 40-2627 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Jba 40-2627